| 
							Commission 5 at FIG Working Week 2025The FIG Working Week 2025 was held from 6-10 
							April 
							in Brisbane, Australia. During the conference, Commission 
							5 had organised severaly sessions in the tehcnical 
							programme and conducted its annual meeting. 
							Additionally, the progress of all commissions was 
							presented at the General Assembly.  > 							
							Commission 
							5 annual report to General Assembly>
							Minutes 
							- General Assembly
 >
							
							Report - General Assembly
 > 
							Proceedings/Technical programme
 > Conference 
							Website
 | Commission 5 Annual Meeting 2024 24-26 September 2024 The Commission 5 meeting will be held jointly 
							with Commission 7, LADM, STDM Workshops and 
							Geoinformation Week 2024 in Malaysia under the main 
							title: Geospatial Innovation for Sustainable Rural 
							and Urban Development  
							Read more | Cost Effective Precise Positioning with GNSSFIG Publication no. 74Most surveyors today are aware that data 
							acquisition, management, analysis, presentation and 
							controlling systems are becoming more elaborate and 
							automated. On the other side the results to be 
							provided need to be produced with less cost, so in a 
							costeffective way.
							
							Read more   | 
					
					
					
						| 
								
									| Meet the officersCommission Chair
									  Dr. Ryan 
									Keenan, AustraliaContact: FIGCommission5@fig.net
 |  
									| Working Group Chairs: Chair of Working Group 5.1
							
							Standards, Quality Assurance and CalibrationDr. David Martin
 E-mail: david.martin@esrf.fr
 
 Chair of Working Group 5.2
							3D Reference Frames
 Dr. Nic Donnelly
 Email: ndonnelly@linz.govt.nz
 
 Co-Chair of Working Group 5.2
 Mr. Chris Pearson
 Email: chris_pearson@trimble.com
 
 Chair of Working Group 5.3
							Vertical Reference Frames
 Mr. David Avalos-Naranjo
 Email: 
	  david.avalos@inegi.org.mx
 
 Chair of Working Group 5.4
							GNSS
 Dr. Eldar Rubinov
 Email: 
	  erubinov@frontiersi.com.au
 
 Co-Chair of Working Group 5.4
 Dr. Safoora Zaminpardaz
 Email: 
	  safoora.zaminpardaz@rmit.edu.au
 
 Chair of Working Group 5.5
	  Multi-Sensor-Systems
 Dr. Amir Khodabandeh
 Email: 
	  akhodabandeh@unimelb.edu.au
 Chair of Working Group 5.6
	  Cost Effective Positioning Dr. Li Zhang
 E-mail: 
	  li.zhang@iigs.uni-stuttgart.de
 Commission ChairDr. Ryan Keenan
 E-mail: 
	  ryan@positioninginsights.com.au / figcommission5@fig.net
 
 Vice Chair of Administration
 Dr. Kevin Ahlgren
 E-mail: kevin.ahlgren@noaa.gov
 
 | Delegates and Correspondents:Each member association has the right to 
									nominate a delegate to each of the ten technical 
									commissions. In addition Affiliates, Academic 
									Members and Corporate Members  are welcome to nominate a 
									correspondent to each commission.  Commission 
										Delegates and correspondents Interested? If you are 
									interested to become a national delegate from your 
									country, please contact your
									
									member association. The contact information of national delegates is 
									updates by the FIG office. Any changes in contact 
									information should be sent to the FIG 
									Office.  
									 |  
									| 
 |  
									| Achievements |  
									|  | Most surveyors today are aware that data 
									acquisition, management, analysis, 
									presentation and controlling systems are 
									becoming more elaborate and automated. On 
									the other side the results to be provided 
									need to be produced with less cost, so in a 
									costeffective way. Read the publication
 |  |  |  
									|  |  
									|  | Since the dawn of civilisation, people have 
									found it necessary to measure and map their 
									domain. During very early times this concern 
									was limited to the immediate vicinity of 
									their home; later it expanded to the 
									distance of markets; and finally, with the 
									development of means of transportation and 
									communication people became interested in 
									the whole world. Read the publication
 |  |  |  
									|  |  
							| Working GroupsTerm 2023-2026: Work 
							plan
 WG 5.1
							
							Standards, Quality Assurance and CalibrationWG 5.2
							3D Reference Frames
 WG 5.3
							Vertical Reference Frames
 WG 5.4
							GNSS
 WG 5.5
							Multi-Sensor-Systems
 WG 5.6 							Cost Effective Positioning
 Previous termsTerm 2019-2022Term 2015-2018
 Term 2011-2014
 Term 2007-2010
 Term 2003-2006
   | FIG PublicationsFIG Pub. no. 74:
							
							Cost Effective Precise Positioning with GNSS 
						   FIG Pub. no. 64:
							
							Reference Frames in Practice Manual FIG Pub. no. 49:
							Cost Effective GNSS Positioning Techniques (2nd 
							edition)  
							  | FIG Proceedings
							
							List of FIG Conference ProceedingsFIG 
							Surveyors Reference Library
 Previous newsletters
							July 
			2018July 
			2017
 | EventsAll Commission 5 events Reports to General Assembly
							 All Commission 5 reports |  |